FiberFab Home

Opterna FiberSentinelTM System

Wow

It can be shown that an intruder can easily tap a fiber without being detected. Low cost, commercially available clip-on couplers enable the non-invasive tapping and monitoring of fiber optic data streams. NeSTRONIX' breakthrough Opterna FiberSentinel System, with its exclusive WaveSense intrusion prevention technology, provides continuous, real-time monitoring of a fiber connection, detects any physical intrusions, and instantly eliminates the intrusion by shutting down the transmission. Automatic optical bypass switching simultaneously diverts data to an alternate fiber path.

Features:

• Continuous, real-time, protocol independent monitoring of a fiber optic network connection without any disruption of the data stream
• NeSTRONIX’ exclusive WaveSenseTM intrusion prevention technology is based on advanced artificial intelligence techniques
•

WaveSense technology automatically:
•Detects intrusions
•Instantly shuts down the intrusion
•Simultaneously re-routes traffic to a backup fiber path
•Notifies the user via SNMP network management
• WaveSense technology automatically identifies, differentiates, and characterizes eight distinct optical event types:
Intrusions, optical signal injection by an intruder, cable breaks, transients, receiver overloads, low optical signal levels, loss of data signal, and FiberSentinel power off conditions
• Flexible, scalable, stackable architecture


Dimensions:
19” rack mountable, 1 rack unit high 17” x 13” x 1.75”

Electrical:
Power Input Interface: IEC 320, 3 position Input Voltage: 100 - 240 V, 60/50 Hz

Environmental:
Operating Temp: 0º C to 55º C
Storage Temp: -10º C to 65º C
Humidity: 0% - 90% non-condensing, operational 5% - 95% non-condensing, storage

Diagnostic LEDs:
Power Status, Tx & Rx status, primary and backup paths Link/Activity, Ethernet SNMP port

General Specifications:

Operating wavelength: 850nm or 1310nm or 1550nm
Protocols supported:
Protocol independent Insertion loss: 1.5dB typical, 2.4dB maximum
Minimum channel strength: -45dBm
Maximum channel strength: +5dBm
Monitoring resolution: 0.02dB
Intrusion shutdown: 25ms typical
Backup path switching time: < 4msec Data channel
Cable type: singlemode or multimode fiber
Data channel connector type: SC duplex, optional FC or ST Network management: SNMP via Ethernet interface, RS-232c Console port Approvals: FCC Part 15 J Class A CE Mark UL 1950, Third Edition

Dia

Ordering Information:

FSS-2165S-1310-SC Singlemode, 80km max.,1 duplex fiber, 1310nm, SC Duplex
FSS-2165S-1550-SC Singlemode, 80km max.,1 duplex fiber, 1550nm, SC Duplex
FSS-2100M-0850-SC Multimode, 300m max.,1 duplex fiber, 850nm, SC Duplex
FSS-2101M-1310-SC Multimode, 1km max.,1 duplex fiber, 1310nm, SC Duplex

Power Cord
-1 = no power cord
-2 = US/Canada/Japan
-3 = Europe
-4 = UK
-5 = Australia/Argentina

Back to top