Pre-Terminated Fibre Optic Cable - 62.5/125 or 50/125 Multimode or Singlemode

	Close Window
Pre-Terminated FiberOptic Cable

Fibrefab pre-terminated fiber optic cable is designed to take the cost out of fiber installation. Now there is no need to purchase expensive fiber termination and test equipment. Fibrefab pre-terminated cable is available as either 62.5/125 or 50/125 multimode or singlemode with either 4, 8, 12, 16 or 24 fibers at any length you require (min 10m). We will professionally terminate both ends (i.e. a 4 fiber pre-term will have 8 connectors) with the connectors of your choice. Once terminated in our ISO approved test facility we will perform rigorous tests to ensure the cable meets our rigid standards. Test results are supplied with the cable. To avoid damage the fiber is protected with an armored plastic tube, completely coving the terminated fibers. The tube in turn has a Kevlar™ pulling eye so even difficult cable runs can withstand a greater pulling strain without damage the fiber.
. All Pre-terminated cable assemblied use Tight Buffered LSZH cable . Can be terminated with the connector of your choice . Available with 4, 8, 12, 16, and 24 fiber cores
Fibrefab has recognised the need for the pre-terminated cable solution to allow our customers to easily install there own fiber network. This network can then simply be plugged in without all the time consuming effort that it takes to do a traditional type of fiber optic install. This plug and play flexibility again recognises Fibrefab as a leader in fiber optic solutions. For details of all connector used for preterminated solutions please contact us for a datasheet. Tubing diameter: 26.5 mm Pulling eye outer diameter: 31.5 mm


Back to top

Fibrefab pre-terminated fiber optic cable is designed to take the cost out of fiber installation. Now there is no need to purchase expensive fiber termination and test equipment.

Fibrefab pre-terminated cable is available as either 62.5/125 or 50/125 multimode or singlemode with either 4, 8, 12, 16 or 24 fibers at any length you require (min 10m). We will professionally terminate both ends (i.e. a 4 fiber pre-term will have 8 connectors) with the connectors of your choice.

Once terminated in our ISO approved test facility we will perform rigorous tests to ensure the cable meets our rigid standards. Test results are supplied with the cable. To avoid damage the fiber is protected with an armored plastic tube, completely coving the terminated fibers. The tube in turn has a Kevlar™ pulling eye so even difficult cable runs can withstand a greater pulling strain without damage the fiber.