FiberFab
FiberFab Home

50/125 Bend Insensitive Patchcords

Description

The FiberFab range of patchcords has developed from standard multimode fiber to high performance single mode patchcords and the latest OM3 optical fiber. FiberFab now offers a range of solutions where bend radius management is limited. These patchcords have a higher tolerance for bending so these patchcords can withstand bend radius down to 15mm rather than the standard 30mm.

bend insensitive
FiberFab has 15 years experience in manufacturing fiber optic cable assemblies using Biconic and SMA through ST, SC to today’s Small Form Factor connectors like the LC, MU and MT-RJ. If you have a fiber network, no matter what the technology, FiberFab can offer you a solution to your problem.

The FiberFab range of patch cords has grown through the years, from every day standard lengths to special products to meet your needs. From industry standard 62.5/125 multimode to 9/125 singlemode right the way up to state of the art OM3 50/125 cable assemblies, FiberFab can supply them all.


Specifications
table

Description
The FiberFab optical fiber patch cords are manufactured using the best quality components. The connectors are the market leading FiberFab range of connectors, and the cable exceeds all areas of the standards required for the assembly being produced.

Optical Performance (Multimode)
Insertion loss: Max. 0.5 dB Typical 0.35 dB

Optical Performance (Singlemode)
Insertion loss: Max. 0.3 dB Typical 0.2 dB

Return Loss: UPC better than 50dB
APC better than 60dB

Connectors Types:
FC, FC/APC, ST, SC, SC/APC, LC, E2000

Mechanical
Length: 1000mm to 10,000mm ± 10mm
Other lengths available to order

For full information on the FiberFab connectors used on the FiberFab patch cords, please contact the address below for a connector data sheet.

Intermateability
Optically and mechanically compatible with all equivalent connectors.
Compliant with IEC 874-14.

Product Packaging
Each patch cord is packaged individually and individually identified for traceability, test certification is supplied for each assembly.

Vibration (Mated Pair):
(IEC 61300-2-1) 10-55 Hz, 1.5mm P to P
=0.3dB Change

Mating Durability:
(IEC 61300-2-2) 1000 mating cycles Clean every 25
< 0.2 dB Change

High Temperature:
(IEC 61300-2-18) 75°C for 96 hours
=0.2dB Change

Damp Heat:
(IEC 61300-2-19) 60°C at 95% RH, 96 hours
=0.2dB Change

Temperature Cycling
(IEC 61300-2-48) -40 to +85°C, 42 cycles
=0.2dB Change

Operating Temperature
-40°C to +85°C




Ordering Information
Connectors End 1 Connectors End 2 FiberSize Cable Configuration Cable Color Length (m)
* * 50I
OM3I		 S OR +


* = FC, SC,ST, LC, MU, E2000

+ = 1m,2m,3m,5m,10m

Back to top