FiberFab Home

62.5/125 (OM1) Optical Fiber Patchcords

Description

Optical Fiberpatchcords are a defining factor in ensuring your network performs to the highest level.
A patchcord can be split into three key components;

. The connector
. The cable
. The manufacturing process.

These three areas all contribute to the performance of a patchcord, but it is the manufacturing process that defines the performance of the assembly. Whilst the cable and connectors used in FiberFab optical fiber patchcords are the best available, it is our expertise in production that sets our products apart. FiberFab has 15 years experience in manufacturing fiber optic cable assemblies from using Biconic and SMA through to ST, SC to today's Small Form Factor (SFF) connectors like the LC, MU or MT-RJ. If you have a fiber network, no matter what the technology, FiberFab can offer you a solution.

pigtails

. Multimode & Singlemode applications ST/SC/FC/LC/E2000/MU Connector types

. Ultra polish & Angle polish options available all terminations are manufactured to exceed performance parameters set by industry standards

. Fast turn around of non-standard requirements

. Full tracability & test certification supplied with each assembly

. 900µm tight buffered fiber optic cable

Specifications


Patchcord Specification

Mechanical
Length: 1m to 10m ± 10mm
Other lengths available to order


Split Length (Duplex): 150mm ± 5mm

Product Packaging
Each patch cord is packaged individually and individually identified for traceability, test certification is supplied for each assembly.
Optical fiber and cable performance

Attenuation (dB/km)
(850/1300) 2.8/0.8

Bandwidth (MHz.Km)
(850/1300) 500/500

Sheath color
Orange

Strength Members
Aramid strength members

Fire Performance
LSZH for Internal/External Applications
Flame Resistance IEC 60332-1
Connector Specification

Optical Performance (Multimode)
Insertion loss: Max. 0.3 dB Typical 0.2 dB

Optical Performance (MT-RJ)
Insertion loss: Max. 0.5 dB

Operating Temperature: -40°C to +85°C

Intermateability
Optically and mechanically compatible with all equivalent connectors.
Compliant with IEC 874-14.

For full information on the FiberFab connectors used on the FiberFab patch cords, please contact the address below for a connector data sheet.

Ordering Information
Connectors End 1 Connectors End 2 FiberSize Cable Configuration Cable Color Length (m)
* * 62 ** OR/
GY		 +


* = FC, FC/APC, SC, SC/APC, ST, LC, MT-RJ, MU, E2000 (others available upon request)

** = S - Simplex, D - Duplex

+ = 1m,2m,3m,5m,10m

Back to top