MTRJ Optical Fibre Connector

	Close Window
MTRJ Optical Fiber Connector

The MT-RJ connector is a development of the now legendary MT ferrule. This amazing technology is at the heart of many state of the art connectors. The MT ferrule in its various designs has the ability to connect anything from two fibers in the MT-RJ or up to 72 fibers in the latest versions of the MPO connector. The FiberFab version of the MT-RJ, is capable of terminating any 125mm fiber. The flexibility of the connector allows it to be used in short run local area networks as well as longer haul cabling using single mode fiber. Designed to terminate two fibers within a single connector, reducing the risk of operator error when inter-connecting equipment and distribution panels. The MT-RJ has been deliberately designed to look and feel like the industry standard copper connector. The high density MT-RJ connector allows the termination of high fiber count backbone cables to be terminated in smaller distribution panels.

Features . MT based multi-fiber connector for two fibers . High density connector allows up to 72 fibers to be terminated in a 1u distribution panel . Latched lever similar to that found on standard copper connectors . Reliable quality supported by more than 15 years of FiberFab experience
Specifications: Intermateability Optically and mechanically compatible with all equivalent connectors. Compliant with IEC 61754-18. FiberType: 9/125SM 50/125MM, 62.5/125MM Fiber Count: 2 Insertion Loss (With master plug) Standard Loss: =0.5dB Low Loss: =0.35dB Return Loss: =45dB Cable Type: Mini Zip Adapter Bulkhead: Single connector - Duplex Vibration (Mated Pair): (IEC 61300-2-1) 10-55 Hz, 1.5mm P to P =0.3dB Change Mating Durability: (IEC 61300-2-2) 1000 mating cycles Clean every 25 < 0.2 dB Change Damp Heat: (IEC 61300-2-19) 60°C at 95% RH, 96 hours =0.2dB Change Operating Temperature -10°C to +60°C
Description The MT-RJ connector is a high-density, small form factor connector designed to reduce the space required in the distribution cabinets. FiberFab has a full range of tools and products to assist you with the termination of the MT-RJ connector. For those who prefer to purchase pre-terminated pig-tails FiberFab can supply all your needs. For full information on the full range FiberFab MT-RJ products and tooling please contact the address below for a data sheet. Product Packaging Connector in kit form, packaged in 100pcs
Back to top

MTRJ Optical Fiber Connector

The MT-RJ connector is a development of the now legendary MT ferrule. This amazing technology is at the heart of many state of the art connectors. The MT ferrule in its various designs has the ability to connect anything from two fibers in the MT-RJ or up to 72 fibers in the latest versions of the MPO connector.

The FiberFab version of the MT-RJ, is capable of terminating any 125mm fiber. The flexibility of the connector allows it to be used in short run local area networks as well as longer haul cabling using single mode fiber.

Designed to terminate two fibers within a single connector, reducing the risk of operator error when inter-connecting equipment and distribution panels. The MT-RJ has been deliberately designed to look and feel like the industry standard copper connector.
The high density MT-RJ connector allows the termination of high fiber count backbone cables to be terminated in smaller distribution panels.

MTRJ

Features

. MT based multi-fiber connector for two fibers

. High density connector allows up to 72 fibers to be terminated in a 1u distribution panel

. Latched lever similar to that found on standard copper connectors

. Reliable quality supported by more than 15 years of FiberFab experience

Specifications:

Intermateability
Optically and mechanically compatible with all equivalent connectors.
Compliant with IEC 61754-18.

FiberType:
9/125SM
50/125MM,
62.5/125MM

Fiber Count: 2

Insertion Loss (With master plug)
Standard Loss: =0.5dB
Low Loss: =0.35dB

Return Loss: =45dB

Cable Type: Mini Zip

Adapter Bulkhead:
Single connector - Duplex

Vibration (Mated Pair):
(IEC 61300-2-1)
10-55 Hz, 1.5mm P to P
=0.3dB Change

Mating Durability:
(IEC 61300-2-2)
1000 mating cycles
Clean every 25
< 0.2 dB Change

Damp Heat:
(IEC 61300-2-19)
60°C at 95% RH, 96 hours
=0.2dB Change

Operating Temperature
-10°C to +60°C

Description

The MT-RJ connector is a high-density, small form factor connector designed to reduce the space required in the distribution cabinets.

FiberFab has a full range of tools and products to assist you with the termination of the MT-RJ connector. For those who prefer to purchase pre-terminated pig-tails FiberFab can supply all your needs.

For full information on the full range FiberFab MT-RJ products and tooling please contact the address below for a data sheet.

Product Packaging
Connector in kit form, packaged in 100pcs

Cad