FC Optical Fibre Connector

FC Optical Fiber Connector
	Close Window

The FC connector is used extensively in the telecommunications market, where long singlemode optical fiber cables can run upwards of 50km. In these extreme situations the connector needs to have extremely low loss and accurate geometry. The FiberFab FC Optical Fiberconnector comprises of a nickel plated brass body and a ceramic ferrule/spring/crimp barrel assembly plus a crimp over sleeve and rubber boot. These connectors are suitable for 900µm and 2 and 3mm cables. The connector is precision made and manufactured to demanding specifications. The combination of a ceramic ferrule and a precision nickel plated brass housing provides consistent long-term mechanical and optical performance. The FiberFab FC connector is available in Singlemode PC and APC versions as well as multimode. FiberFab has 15 years experience in manufacturing fiber optic connectors and cable assemblies. From Biconic and SMA through ST, SC to today’s Small Form Factor connectors like the LC, MU or MT-RJ. If you have a fiber network, no matter what the technology, FiberFab can offer you a solution to your problem. FiberFab has full ISO9001 on all of its manufacturing facilities, so you can be confident you are using the very best in cable, connectors and manufacturing.
Description The FC connector is a widely used connector. It can be seen in every area of the communications environment, from a telecoms distribution room to a local area network closet the FC has set the standard for optical fiber connectors. The FiberFab FC connectors are manufactured using the highest quality components. The connectors exceeds all areas of standards covering optical fiber connectors. Versions Available: 2mm Patch 3mm Patch 900 mm Termination Procedures Prep cable end, Epoxy-Crimp-Polish Product Packaging Standard packaging: 100pcs Bulk packed Special packaging available by request Colours 900 mm Boot, Blue, Black 2 and 3 mm Boot, Blue, Black Intermateability Optically and mechanically compatible with all equivalent connectors. Compliant with IEC 61754-13. Optical Performance Singlemode Insertion loss: Max. 0.3 dB Typical 0.2 dB Return Loss: UPC > 50dB Typical 55 dB APC > 60dB Typical 65 dB Multimode Insertion loss: Max. 0.3 dB Typical 0.12dB (IEC 874-1 method) Mechanical Capillary diameter tolerance: SM—126 ±0.5µm MM—127 =/- 0.5µm Ferrule Diameter:2.5mm ± .001 Pre-radiused, PC-end finish for Physical Contact ferrule to ferrule. R 10 to 25mm Tensile Strength Cable retention: >50 N (2 & 3mm boot versions only) Vibration (Mated Pair): (IEC 61300-2-1) 10-55 Hz, 1.5mm P to P =0.3dB Change Mating Durability: (IEC 61300-2-2) 1000 mating cycles Clean every 25 < 0.2 dB Change High Temperature: (IEC 61300-2-18) 75°C for 96 hours =0.2dB Change Damp Heat: (IEC 61300-2-19) 60°C at 95% RH, 96 hours =0.2dB Change Temperature Cycling (IEC 61300-2-48) -40 to +75°C, 40 cycles =0.2dB Change Operating Temperature -40°C to +85°C Ordering Information:
Back to top