LC Optical Connector

LC Optical Connector
	Close Window

The LC connector was the first small form factor connector on the market. The use of a high performance 1.25 mm ferule gives the connector extremely high performance characteristics. The FiberFab LC optical fiber connector comprises of a polymer body and a ceramic ferrule/spring/crimp barrel assembly plus a crimp over sleeve and rubber boot. These connectors are suitable for 900µm and 2 mm cables. The connector is precision made and manufactured to demanding specifications. The combination of a ceramic ferrule and a precision polymer housing provides consistent long-term mechanical and optical performance. FiberFab has 15 years experience in manufacturing fiber optic connectors and cable assemblies. From Biconic and SMA through ST, SC to today’s Small Form Factor connectors like the LC, MU or MT-RJ . If you have a fiber network, no matter what the technology FiberFab can offer you a solution to your problem. FiberFab has full ISO9001 on all of its manufacturing facilities, so you can be confident you are using the very best in cable, connectors and manufacturing.
Specification: The LC connector was the first small form factor connector on the market. It can be seen extensively in the local area network closet as a standard fit to many market leading hubs and switches. The LC sets the standard for small form factor connectors. The FiberFab LC connector are manufactured using the best quality components. The connectors exceeds all areas of the standards covering optical fiber connectors. Versions Available 2mm patch 900 m Termination Procedures Prep cable end, Epoxy-Crimp-Polish Product Packaging Standard packaging: 100pcs Bulk packed Special packaging available by request Shell Connector versions available for: 2mm Cable 900 m Buffered Fibre Simplex & Duplex Color Blue - single mode Beige - multimode Intermateability Optically and mechanically compatible with all equivalent connectors. Compliant with IEC 61754-20. Optical Performance Singlemode Insertion loss: Max. 0.3 dB Typical 0.2 dB Return Loss: UPC > 50dB Typical 55 dB APC > 60dB Typical 65 dB Multimode Insertion loss: Max. 0.3 dB Typical 0.12 dB (IEC 874-1 method) Mechanical Capillary diameter tolerance:126 +1/-0 µm Ferrule Diameter:1.25mm ± .001 Pre-radiused, PC-end finish for Physical Contact ferrule to ferrule. R 10 to 25mm Tensile Strength Cable retention: >50N (2 mm boot versions only) Vibration (Mated Pair): (IEC 61300-2-1) 10-55 Hz, 1.5mm P to P =0.3dB Change Mating Durability: (IEC 61300-2-2) 1000 mating cycles Clean every 25 < 0.2 dB Change High Temperature: (IEC 61300-2-18) 75°C for 96 hours =0.2dB Change Damp Heat: (IEC 61300-2-19) 60°C at 95% RH, 96 hours =0.2dB Change Temperature Cycling (IEC 61300-2-48) -40 to +85°C, 42 cycles =0.2dB Change Operating Temperature -40°C to +85°C Ordering Information:
Back to top