FiberFab Home

Palmtop Media Converter

FiberFab Palmtop media converter is a 10/100Base-TX to 100Base-FX media converter, which features LFP (Link Fault Pass-through) function for easily tracing the network link failure. LFP function can enhance the integrity and conformity of the TP-Fiberlinking to improve the maintainability of the network. Two LED’s are provided to monitor the operation status of the converter

Palmtop Palmtop

Features, Benefits, and Advantages

. LFP (Link Fault Pass-through) function.

. Power from external power adapter.

. Choice of ST or SC connector for multimode and single mode.

. Supports packet length up to 1536 bytes.

. Compact plastic housing

Specifications

Standard Compliance: IEEE802.3u 10/100Base-TX, 100Base-FX

Power from external power adapter
Choice of SC or ST connector for multimode and single mode
Support packet length up to 1536 bytes

Data Transfer Rate
100Mbps: 148,800 pps
10Mbps: 14,880 pps

MAC address: 2K

Buffer Memory: 384K

Connector:
RJ-45: 10/100Mbps (Auto-negotiation)
ST/SC: 100Mbps

Cable
TP: Cat.5 (Support distance up to 100m)
Fibre(M-M): 50/125, 62.5/125, 100/140ìm (Support distance up to 2Km) -
Fiber (S-M): 8.3/125, 8.7/125, 9/125, 10/125ìm
(Support distance up to 100Km)

Flow Control
IEEE802.3x compliant for full-duplex
Backpressure flow control for half-duplex

Dimensions
Width (max) 72mm
Depth 56mm
Height 25mm

Table

Power Requirement: 1A@+5VDC from AC-DC Adapter

Operation Temperature: 0 ~ 50 C

Humidity: 5% ~ 90%

Safety: Complies with FCC Part 15 Class A & CE Mark

Back to top