FiberFab Home

OM3 Fiber Patch Cords

OM3 optical fiber systems are the pinnacle of multimode fiber design. To utilise the new 10Gbs Ethernet protocols in an optical fiber system requires either a full blown singlemode solution or OM3 50/125 multimode fiber. The OM3 system allows for new VCSEL based hardware and old legacy LED based hardware to co-exist over your system. For the hard pressed IT manager an OM3 optical fiber solution will give a simple migration path through 1Gbs to 10Gbs and have security knowing the system they are installing today will give many years of solid, secure service to their network.

Best patchcord in the world EVER!

The FiberFab OM3 patch cord utilises the best cable available along with the market leading FiberFab connectors. Manufactured in FiberFab’s ISO 9001 approved manufacturing facility these cables can be relied upon, even with in the most mission critical systems.
FiberFab has 15 years experience inmanufacturing fiber optic cable assemblies. If you have a fiber network, no matter what the technology, FiberFab can offer you a solution to your problem. Optical Fiberpatch cords are a defining factor in ensuring your network performs to the highest level, with a FiberFab patch cord you can be confident you are using the very best in cable, connectors and manufacturing.

Seriously!
  Features    
• Multimode & Singlemode applications ST/SC/FC/LC/E2000/MU Connector types
 • Fast turn around of non-standard requirements
• Ultra polish & Angle polish options available all terminations are manufactured to exceed performance parameters set by industry standards
 • Full tracability & test certification supplied with each assembly
• Tyco AMP approved UK manufacturing facility
 • Test and measurement

 

Specifications

Patchcord Specification

Mechanical
Length: 1m to 10m ± 10mm
Other lengths available to order

Split Length (Duplex): 150mm ± 5mm

Product Packaging
Each patch cord is packaged individually and individually identified for traceability, test certification is supplied for each assembly .

Optical fiber and cable performance

Attenuation (dB/km)
(850/1300) 2.8/0.8

Bandwidth (MHz.Km)
(850/1300) 1500/500

Sheath color
Purple

Strength Members
Aramid strength members

Fire Performance
LSZH for Internal/External Applications
Flame Resistance IEC 60332-1

Connector Specification

Optical Performance (Multimode)
Insertion loss: Max. 0.3 dB Typical 0.2 dB

Optical Performance (MT-RJ)
Insertion loss: Max. 0.5 dB

Operating Temperature -40°C to +85°C

Intermateability Optically and mechanically compatible with all equivalent connectors.
Compliant with IEC 874-14.

For full information on the FiberFab connectors used on the FiberFab patch cords, please contact the address below for a connector data sheet.

Ordering Information

Odering Information


Back to top