FiberFab Home

OPTMS - Single/Multi Mode Test Kit
With Wave ID And Set Reference

The OPTMS test kit combines the OPTPM AUTO optical power meter and OPTLS QUAD integrated LED and LASER light source and is ideally suited for testing fiber optic networks with singlemode and multimode cables.

The OPTLS QUAD features 850 nm and 1300 nm LED output from a multimode output port and 1310 nm and 1550 nm LASER output from a singlemode output port. The LED and LASER outputs are stabilized to ensure accurate test results per current TIA/ EIA requirements. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence.

Both output ports are equipped with removable SC adapter to allow the output connector to be inspected and cleaned. The OPTPM offers Wave ID, automatic wavelength identification and switching, when used with the OPTLS QUAD. Multiple test Tone detection is provided for fiber identification. The OPTM AUTO stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or W] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status.

In addition to being powered by two AA alkaline, the OPTPM AUTO can be powered by optional AC adapter and/or rechargeable NiMH battery pack.

Top notch gear

Features:

Rugged, handheld, lightweight

Designed for field use

Certify multimode and single-mode links per TIA/EIA standards

Wave ID - automatic wavelength identification and switching

Dual Wave ID, single Wave ID, CW, and modulated Tone (on single-mode output)

270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone

Large LCD with Backlight

Power measurements in dBm or µW; insertion loss in dB

Reference power level storage

AA alkaline, optional rechargeable NiMH battery pack or AC adapter

Low battery indicator

Free 50 µm and 62.5 µm mandrels

Cost-effective, easy to use
N.I.S.T traceable

Ordering Information

Description
OPTLS QUAD optical light source, OPTM AUTO optical power meter, AA batteries, Protective rubber boots, adapter cap, 50 µm and 62.5µm mandrels, user guide and carry case

Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles and fiber types are available. Adapter caps for most common connectors may be purchased.

Part Number: OPTMSKIT

This product complies with RoHS and WEEE directives

Technical Data

Tables


Back to top