High Density Panels /

FiberFab Inc offers an innovative, High Density Patch Panel designed to accommodate up to 120 connections within a 1U panel. These are split between 5 individual modules with up to 24 fibers within each.

Each module accepts incoming fiber from either MTP Trunk Cables or pre-terminated assemblies. Pre-terminated cables are available as either ruggedized breakout cable or distribution cable. Another alternative for cable entry is the patented Optronics FirstLight Prime Breakout, capable of being pulled over long distances and connecting directly to equipment.

Incoming cable can also be supplied un-terminated for splicing within a standard patch panel.

Modules can enter the panel from the front or the rear. Each is supplied with a separate labelling card for ease of channel identification. Cable entry is managed via a retrofit management bar allowing entry from either the left or the right hand side.

Exiting patch cords are managed by a retrofit bracket allowing cables to be routed in any direction.

Also available are a 3U system incorporating all of the above but with the addition of a removable door allowing complete access to all relevant components and a 0U solution designed to accommodate sufficient MTP connectivity to support an individual blade per module. This is managed via a 96 fiber trunk cable directly terminated to 8 MTP Connectors within the module and the choice of MTP or discrete connectors at the opposing end.

• Modular connection system
• High density - scaling up to 120 discrete connectors and up to 720 fibers within MTP interface
• Up to 24 discrete or 144 (MTP) fibers connections a single module
• Cable entry via either MTP connection or pre-terminated assemblies
• Pre-loaded in the factory to guarantee performance
• Can be supplied with pre-terminated Pigtails for splicing on the opposite end
• Can be supplied with a module at one end and ruggedized tails for direct connection to equipment at the opposing end
• Can be supplied with a module at one end and 900μm tails for connection within a standard patch panel at the opposing end
• 5 individual modules per panel
• Module entry from front or rear
• Rear cable management
• Retrofit patchcord exit management
• Separate labelling cards
• ROHS, REACH SvHC and UL rated
• Fits standard 19” or ETSI rack

Applications

• Data centers, premise installations, telecommunication networks
• Ethernet, fiber channel, ATM, LAN, MAN and WAN
• Data communication and telecommunication networks
• Indoor applications